500-TX Resistal Jet Helmet
The shell sizes are available in two: S shell and L shell.
The internal sizes are available in four: XS, S/M, L/XL, and XXL.
This is a complete reproduction of an extremely rare model that was manufactured for only two years in the 1960s.
Faithfully recreated to match the original.
Size: L/XL (58–60 cm)
Note: The helmet shell changes depending on the size.
The interior uses a classic vintage-style design, resulting in a loose fit.
Please be careful not to lose the visor or chin cup, as they are not sold separately.
The helmet shell is made using the same FRP (fiberglass reinforced plastic) method as the original.
Handmade fiberglass shell.
Instead of a painted finish, the surface uses a gel coat finish.
Reproduces the original texture from the era, including:
Pinholes
Color inconsistencies
Mold seams
Exposed fiber weave pattern
This is a made to order item, and requires more time to create, please email if you have any questions. Lead time is 4-8 weeks.
<Using the S Shell>
XS size (54-55 cm)
S/M size (56-57 cm)
The shape around the cheeks is tighter than typical helmets.
<Using the L Shell>
L/XL size (58-59 cm)
XXL size (60-61 cm)
The fixed internal structure and EPS (foam material) are used.
The D-ring single strap system and the goggle strap at the back of the head are also retained.
This helmet is a decorative helmet (Non-DOT).
The shell sizes are available in two: S shell and L shell.
The internal sizes are available in four: XS, S/M, L/XL, and XXL.
This is a complete reproduction of an extremely rare model that was manufactured for only two years in the 1960s.
Faithfully recreated to match the original.
Size: L/XL (58–60 cm)
Note: The helmet shell changes depending on the size.
The interior uses a classic vintage-style design, resulting in a loose fit.
Please be careful not to lose the visor or chin cup, as they are not sold separately.
The helmet shell is made using the same FRP (fiberglass reinforced plastic) method as the original.
Handmade fiberglass shell.
Instead of a painted finish, the surface uses a gel coat finish.
Reproduces the original texture from the era, including:
Pinholes
Color inconsistencies
Mold seams
Exposed fiber weave pattern
This is a made to order item, and requires more time to create, please email if you have any questions. Lead time is 4-8 weeks.
<Using the S Shell>
XS size (54-55 cm)
S/M size (56-57 cm)
The shape around the cheeks is tighter than typical helmets.
<Using the L Shell>
L/XL size (58-59 cm)
XXL size (60-61 cm)
The fixed internal structure and EPS (foam material) are used.
The D-ring single strap system and the goggle strap at the back of the head are also retained.
This helmet is a decorative helmet (Non-DOT).